angus


angus STAFF


Joined 14th June 2016

2 Forum Threads

Here are the most recent threads angus has started in the Forum:

Scratch3 Beta Feedback

Posted 15:07:26, 21st September 2018   |   № 122

See the Beta here http://scratch3beta.robotical.io

We'll be pushing periodic updates to it before release, so if something doesn't quit work right just check back again later. Please let us know if you've found anything broken, have suggestions for us or even the main Scratch 3 developers!

Scratch3 is currently slated for an early January 2019 release.

Source for Scratch 3 is on our GitHub

View Thread

Marty Android & iOS App Beta - Feedback and Discussion

Posted 19:00:56, 16th November 2017   |   № 72

As mentioned on the blog, we've released a Beta Android app (iOS App coming soon) that makes calibration and WiFi setup a lot easier, and will replace the way of doing things as written in the Setup & Calibration Guide.

We're keen to get feedback from those of you already using Marty and those of you us a comment beused t…

View Thread

Trophies

Staff

Staff

Worked at Robotical LTD
26th May 2016
Crowdfunder

Crowdfunder

Contributed to Marty's crowdfunding campaign in 2016/17
14th June 2016
A002113

A002113

Got a Palindromic order number
22nd October 2017
 

46 Forum Comments

Here are the most recent comments that angus has made in the Forum:

In response to Thread № 126 Microsoft Edge for Scratch X

Hi there @Lance

Edge should be fine, the reason we suggest Chrome and Firefox is simply because that's what we're using and testing with …

Posted 10:24:23, 27th November 2018

In response to Thread № 121 Direct Connect Beta Test Feedback

Hi @Imagios - thanks for the feedback! We're actually looking into config-over-USB-cable as a future option... This direct connect actually …

Posted 17:54:41, 07th September 2018

In response to Thread № 118 What do the BOB and RESET buttons do on the Rick board?

Hi there

Bob the Button forces the Marty Setup network to re-appear, which is useful only when you need to change the Robot's saved WiFi …

Posted 10:30:15, 31st July 2018

In response to Thread № 112 Bluetooth not working on PI3

I'll go and add a comment on it now, sorry for it not being there already!

Let us know if the dongle works out for you

Posted 11:43:35, 23rd May 2018

In response to Thread № 112 Bluetooth not working on PI3

Hi there @Windy54

Unfortunately... The Pi is wired up a little weird, and having Bluetooth enabled makes serial really buggy... There i…

Posted 16:21:56, 22nd May 2018

In response to Thread № 107 left knee and calibration

Hi there @sparkie33755!

If you contact support here we can take a look at your video and try and get you…

Posted 11:01:05, 18th April 2018

In response to Thread № 106 Link to new PI image does not work

@Windy54 these images aren't particularly new, but there shouldn't be many major differences between them except from bugfixes etc. The old …

Posted 21:00:42, 16th April 2018

In response to Thread № 106 Link to new PI image does not work

We've been trying to work around some flakiness with DigitalOceans's spaces storage, so everything transitioned over to Amazon S3 todaly. Th…

Posted 20:16:19, 16th April 2018

In response to Thread № 72 Marty Android & iOS App Beta - Feedback and Discussion

@rayfarmer you might need to scroll, depending on the screen size! It's at the bottom below the 'Back' button

Posted 15:49:03, 21st March 2018

In response to Thread № 72 Marty Android & iOS App Beta - Feedback and Discussion

@rayfarmer did you try the "Get Ready" button? It's a sort of reset for the motors, which will be disabled by the control board if they have…

Posted 13:00:39, 21st March 2018

In response to Thread № 72 Marty Android & iOS App Beta - Feedback and Discussion

Spoke too soon! Apple have just approved our iOS app, link to it [here on the App Store](https://itunes.apple.com/WebObjects/MZStore.woa/wa/…

Posted 20:00:01, 19th March 2018

In response to Thread № 72 Marty Android & iOS App Beta - Feedback and Discussion

@heybuddy we have a Test flight Beta of the iOS app we could add you to, just sent support your iCloud email and we'll add you

Posted 20:18:07, 18th March 2018

In response to Thread № 65 Advanced Marty #1 - Raspberry Pi Camera and Ball Following

@richardjackson either Pi3 or ZeroW should work fine, I'd imagine you'd get better battery life with the Zero

Posted 16:07:59, 08th January 2018

In response to Thread № 79 two Foot Springs

Hey there,

Firstly, as you've got one of our first batch Martys, there are some variations between your instructions and our new online gui…

Posted 12:52:05, 29th December 2017

In response to Thread № 62 Marty stumble and seized hip servo

@kjw just to double check, this is about the silver and black metal geared servos, correct?

We did see…

Posted 14:58:09, 14th December 2017

In response to Thread № 13 Ultrasonic sensor

@kjw basically, we think it'll be easier for those looking to start adding sensors to stick a RaspberryPi or Arduino in Marty's head and use…

Posted 14:51:50, 14th December 2017

In response to Thread № 75 Integration with Assistant SDK

Cool project! Is your code somewhere we'd be able to see so we could make our own Marty Assistant? Also, loved the fall at the end :D

Posted 11:18:30, 28th November 2017

In response to Thread № 61 Socket API problem

I'm not too sure what the issue you're looking at is, exactly... I'd recommend perhaps trying the commands using MartyPy with a test conne…

Posted 18:58:24, 21st October 2017

In response to Thread № 62 Marty stumble and seized hip servo

@kjw Marty does have some degree of detection for over-current detection and prevention built in. If a motor is drawing too much current, mo…

Posted 18:44:08, 21st October 2017

In response to Thread № 63 Scratch commands to diagnose problems

@kjw @sandy is probably better qualified to answer re. the scratch behaviour you're seeing, but re. GitHub, yep, the online Scratch won't wo…

Posted 18:39:05, 21st October 2017

In response to Thread № 50 Launch date of the new printed part version

@crazycraig yep, we're going to try and push out updated content on the stuff we've already done like the gripper hands and disco Marty, as …

Posted 18:32:14, 21st October 2017