3D Print Downloads   v0.1

Released  —  License
These parts are now about a year old, and have some significant differences to the production, injection moulded Martys. We will try and get a fresh v1.0 release of 3D Printable parts out asap to have parity with the production robots, so just bear in mind that this design will soon be superceded. The majority of the difference is in the design of the head, the legs are prettymuch unchanged.

If you have a 3D Printer, you can print the plastics for Marty. These parts are slightly different from the Robots we sell, simply because what works well for injection moulding doesn't necessarily work well for a 3D printer.

You'll still need supporting electronics and servo motors, which you can get from us and other suppliers. For the maximum compatibility with the retail Marty Robots, a Rick control board gives you full functionality, but a RaspberryPi and I2C PWM controller board plus some BEC Regulators will work too.

  Code on GitHub (Legacy)

Timings, layer height and infill percentages are our recommendations based on printing with an Ultimaker 2 and a BCN3D Sigma.

Face

Face v0.1

Quantity Required: 1
Approx. print time: 5hr
Approx. filament weight: 58g
Layer height: 0.2mm
Infill: None

Head Base

Head Base v0.1

Quantity Required: 1
Approx. print time: 4hr30m
Approx. filament weight: 51g
Layer height: 0.2mm
Infill: None

Servo Plate

Servo Plate v0.1

Quantity Required: 3
Approx. print time: 16min
Approx. filament weight: 2g
Layer height: 0.15mm
Infill: None

Right Eye

Right Eye v0.1

Quantity Required: 1
Approx. print time: 58m
Approx. filament weight: 6g
Layer height: 0.1mm
Infill: 33%

Left Eye

Left Eye v0.1

Quantity Required: 1
Approx. print time: 56min
Approx. filament weight: 6g
Layer height: 0.1mm
Infill: 33%

Foot

Foot v0.1

Quantity Required: 2
Approx. print time: 2hr11min
Approx. filament weight: 18g
Layer height: 0.15mm
Infill: 33%

Servo Holder (2 Pin)

Servo Holder (2 Pin) v0.1

Quantity Required: 8
Approx. print time: 47min
Approx. filament weight: 6g
Layer height: 0.15mm
Infill: 33%

Servo Mount (1 Pin)

Servo Mount (1 Pin) v0.1

Quantity Required: 4
Approx. print time: 46min
Approx. filament weight: 6g
Layer height: 0.15mm
Infill: 33%

Twist Shaft

Twist Shaft v0.1

Quantity Required: 2
Approx. print time: 26min
Approx. filament weight: 2g
Layer height: 0.1mm
Infill: None

Twist Washer

Twist Washer v0.1

Quantity Required: 2
Approx. print time: 3min
Approx. filament weight: 1g
Layer height: 0.1mm
Infill: None

Cross Brace

Cross Brace v0.1

Quantity Required: 8
Approx. print time: 17min
Approx. filament weight: 3g
Layer height: 0.15mm
Infill: None

Link

Link v0.1

Quantity Required: 12
Approx. print time: 17min
Approx. filament weight: 2g
Layer height: 0.15mm
Infill: 33%

Servo Link

Servo Link v0.1

Quantity Required: 4
Approx. print time: 18min
Approx. filament weight: 2g
Layer height: 0.15mm
Infill: 33%

Arm Servo Gear

Arm Servo Gear v0.1

Quantity Required: 2
Approx. print time: 26min
Approx. filament weight: 4g
Layer height: 0.15mm
Infill: 33%

Arm Gear

Arm Gear v0.1

Quantity Required: 2
Approx. print time: 22min
Approx. filament weight: 4g
Layer height: 0.15mm
Infill: 33%

Arm Pivot

Arm Pivot v0.1

Quantity Required: 2
Approx. print time: 8min
Approx. filament weight: 1g
Layer height: 0.15mm
Infill: None

Arm

Arm v0.1

Quantity Required: 2
Approx. print time: 39min
Approx. filament weight: 6g
Layer height: 0.15mm
Infill: 33%

Hand

Hand v0.1

Quantity Required: 2
Approx. print time: 19min
Approx. filament weight: 3g
Layer height: 0.15mm
Infill: 33%

RaspberryPi Standoff

RaspberryPi Standoff v0.1

Quantity Required: 4
Approx. print time: 4min
Approx. filament weight: 1g
Layer height: 0.15mm
Infill: None

RaspberryPi Camera in-head Mount

RaspberryPi Camera in-head Mount v0.1

Quantity Required: 1

RaspberryPi Camera in-head Mount Mount

RaspberryPi Camera in-head Mount Mount v0.1

Quantity Required: 1

LICENSE


All Releases: