Eyebrows are touching themself during calibration

Hi,

I am in trouble during the calibration of my brandnew Marty. When I start the calibration process, the eyebrows just move and touch eachother and the servo seems to be blocked even if the calibration for the eye gives "0" and I didn't touch the eayebrow with the hands.... What shall I do ?

Discussion

Leave a comment and join the discussion here


Please Log In or Sign Up to write a comment response

1 Responses

Emma OP

We've found the solution to our problem! Since arms and eye servos are the same, we just replace the eye servo by one of the arm servo. After that the eyebrows were too separates but we could repeat several calibration process to get them little by litlle to the horizontal position and after 3 o 4 calibrations we finally managed to do it. Marty is now walking and dancing very well!

20:13:59, 03rd April 2018   |   Permalink   |   View Source