Like all robots, Marty needs to sense the surrounding environment. Adding sensors to your Marty can help Marty to develop a clearer picture of the world, enabling Marty to make better decisions and determine how to respond to environmental features, such as obstacles. There are 5 add-on sensors currently available for your Marty, namely noise, colour, light, distance and disco. These will allow Marty to interact with the surrounding environment and are discussed in further detail below.
A Noise Sensor, as the name suggests, uses noise to trigger a response from Marty. A microphone attached to the sensor will detect sound levels and Marty will navigate based on the sound received. When there is a change of sound, or a certain noise level is reached, Marty will respond with an instructed action. The Noise Sensor can be attached to either of Marty’s feet.
Once attached, you can instruct Marty to respond to the noise however you like. For example, you could make Marty clap-activated. So every time you double clap, Marty will perform his famous wiggle dance!
Let your learners dive into the world of noise sensors and try our fun and interactive initial noise sensor lesson: Noise Sensors and Parallel Programming.
The colour sensor is a type of photoelectric sensor which emits light from a transmitter and then detects the light reflected back from the detection object using a receiver. As the name suggests, this sensor will detect colour and will help Marty distinguish between 5 different colours: purple, blue, green, yellow and red. This sensor can be used in Scratch or in ‘screen free mode’, which can be activated by pressing the ‘A’ button on the back of Marty’s head.
Whenever Marty detects a certain colour while in ‘screen free mode’ he will respond with a pre-programmed instruction:
Purple = Right Slide
Blue = Left Slide
Green = Forward
Yellow = Backward
Red = Stop & Dance
The colour sensor can also detect when there is no colour. Therefore, if Marty doesn’t sense any of the five colours while in ‘screen free mode’, he won’t perform any actions.
In order to use a colour sensor with ‘screen free mode’ you will require a pack of A5 sized coloured cards which can be purchased at our shop.
Once you have your cards, your creativity can flow, and you can set up a fun route for Marty to follow! This is the perfect way to introduce young children to coding, as they will learn to sequence commands before progressing to more advanced languages, like Scratch and Python.
A light sensor is used for light detection and can monitor light intensity, allowing robots to distinguish between light and dark environments. Marty’s light sensor is a photoresistor, commonly known as a light-dependent resistor and allows Marty to respond to varying levels and changes in light.
The light sensor is designed to fit perfectly on either of Marty’s feet and can be used to improve Marty’s vision and responsiveness. This sensor will allow you to program Marty to respond to light and, for example, code Marty to make a noise when the lights turn off.
Marty’s Distance sensor works by outputting a signal (infrared light) and then interpreting how the light has altered on its return. The distance sensor detects and interprets an object through changes in the light intensity of the returned signal or the time taken for the light to return.
The Distance sensor can be attached under Marty’s face and, through either Scratch or Python, Marty can be programmed to react differently to changes in distance between Marty and an object. Just as car parking sensors help drivers understand how close the car is to a wall when reversing, so too Marty can now detect how close he is to a wall when walking!
Why not take the distance sensors on a test drive and try out our distance sensor lesson which challenges learners to consider how they would use this sensor on their Marty.
The last, but certainly not the least fun, type of Marty add-on is the brilliant disco lights. Add some colour to Marty with our LED add-ons which can be purchased in the form of disco eyes, disco arms, disco feet or (for a real Marty party) all together!
A light-emitting diode (LED) is a semiconductor device that releases light when electric current passes through it. Light is created when the electrons and holes merge together within the semiconductor material.
Different semiconductor materials produce different colours of light, meaning you can mix and match your colour options. You can program Marty using Scratch and Python and can use different colours as reactions. Why not give Marty red eyes on Valentine’s day?
What are you waiting for? Dim the lights, cue the music, and set Marty’s entire body to disco mode. Who better to do a robot dance than the expert!