Here are the most recent threads Windy54 has started in the Forum:
Posted 16:17:02, 22nd May 2018 | № 112
I am using the marty PI image and have had him following a ball.
thought I would write a python script using a wii mote to control him.
Noticed the blue tooth interface is disabled.
Anyone else had this problem and if so how did you fix it?
I have not investigated any further myself, yet!
Posted 18:51:26, 16th April 2018 | № 106
Decided to flash a new raspberry PI image down the hackspace tonight to sort out connecting a PI 3 to the internet as well as the hotspot Marty Uses.
Noticed you have up loaded a new image today, the link from the "Adding a PI to Marty does not work".
It takes you through to a listing of a folder contents and then eventually an error message as shown below.
This XML file does not appear to have any style information associated with it. The document tree is shown below. A…
Posted 18:08:44, 27th March 2018 | № 104
Hi, If I understand a reply to a post correctly, with a PI3 you manage to create the wifi hotspot Marty and connect to another wifi network.
I have just dismantled Marty and fitted a wifi dongle to my PI3, re-assembled and then powered up.
The hotspot has not been created, possibly due to the dongle? So I am now about to switch Marty off, dismantle and remove the dongle.
Having done that and re-powered Marty the hotspot is created and I can VNC into Marty.
looking at etc/network/interfaces I be…
Posted 12:36:17, 14th March 2018 | № 103
I have printed the camera mount and fitted a raspberry PI with camera.
I get an image but the bottom quarter of the image is the bottom of the hexagon mouth.
Just wondering whether anyone else has had this issue and how they fixed it?
I notice on the ball following tutorial , the image on page 6 shows a very small amount of the mouth, mine is alot more than that.
Posted 13:14:04, 12th March 2018 | № 101
On the plus side: raspberry pi and camera fitted sorted out enabling of servos, as instructions stab use tab completion! got the first part of ball following to work, i.e. marty walks
Modified the initial walking example to check out some of the other commands hello, walk and lean work
Cant get side step to work.
I have included a snippet from the code below:def sidestep_command (side=0, steps = 1, move_time = 2000, step_length = 50): ''' < little endian B 15 …
Posted 19:50:22, 28th February 2018 | № 98
On the plus side: fitted a PI3 and camera to Marty used your latest raspberry PI image can connect to the marty wifi
Started to follow the"Advanced Marty Raspberry PI Camera and ball following"
everything appeared to work, I could connect to the Marty hotspot and VNC into the PI, see battery voltage, camera output, calibrate the camera to detect a ball.
I typed in the python code under the heading "Actually do something" and Marty did not move.
The confusing thing is that the command …
Posted 17:52:43, 20th August 2017 | № 22
So, built Marty, connected to my home wifi network and had some fun controlling Marty using scratch.
Now, I want to take it out and demonstrate it so I pressed bob the button to start the sequence again and connect to my phone as a mobile hot spot.
Nothing has worked since.
I connected Marty to my phone along with my laptop and confirmed both were connected. Then loaded scratchx but Marty was not detected.
So I pressed bob the button again and connected to my home network, went through the calib…
Here are the most recent comments that Windy54 has made in the Forum:
Hi Angus, Thanks for quick response I will try a dongle.
Might be worth adding a comment on the installing a raspberry PI page to say it…
Posted 07:10:56, 23rd May 2018
Thanks for quick response, I will try it out tomorrow
Posted 21:11:20, 16th April 2018
Just downloaded it thanks, possibly jumping the gun, is there going to be a list of changes in the image?
For instance, I was trying to g…
Posted 20:54:25, 16th April 2018
Thanks for the response. Yes I a man using the official raspberry PI camera, I am guessing V2 because I purchased it at Christmas. Also I …
Posted 21:41:06, 19th March 2018
not sure if this will help, I have just managed to get the ball following working. I have had the jittery marty problem and putting it on c…
Posted 20:38:32, 13th March 2018
It is typical as soon as I post a query I manage to fix it.
I used the auto-completion to enter the command to enable the servos and then…
Posted 20:14:03, 28th February 2018
Hi, tried it again tonight down the hackspace. 10.14.225.99:81 gave the message "This is a websocket server only"
had several attempts …
Posted 20:07:11, 25th October 2017
i like it! having read the previous comments, in particular peter broadford I will have to try it with my Android phone. As you will see fr…
Posted 11:04:40, 24th October 2017
so I have done all of the above and Marty still was not found.
I can connect to Marty at home via my virgin media wifi but nowhere else. …
Posted 22:12:48, 23rd October 2017
Hi Sandy, I should not have put video, checkout the following link https://robotical.io/learn/article/Get%20Started%20with%20Scratch/Intro…
Posted 21:40:02, 21st August 2017
right, well I am working again on my home network, have not got the energy to try and connect to my phone again. This may be my issues 1) …
Posted 18:29:50, 20th August 2017